Moldable Mask - N95Surgical Face Mask
Category Labware & Devices
Safety and Personal Protective Equipment
Keyword(s) COVID 19 ; 3D printing ; emergency ; Mask ; N95;
This is a 3D printable mask that can be used as PPE when regular PPE is not available. The mask can be customized to each user's face by using hot water to mold the mask to their face. Please see the Instructions for Use (IFU) for detailed instructions on how to use the mask as well as information on printing, sizing and sanitation.
3D Modeling/CAD Software
Pre- and Postprocessing Instructions
Please see the Instructions for Use (IFU) in the Documentation tab for detailed instructions on how to use the mask as well as information on printing, sizing and sanitation.
Any FDM printer that can print PLA or ABS material should also be able to print the mask. We recommend using the following settings.
Infill: 25 – 40%
Layer thickness: 0.1 – 0.2 mm
Below are the printer settings used by the designers to print the test piece shown in the images.
Printer: Monoprice MP Select Mini 3D Printer V2
Extruder Temperature: 200 C
Platform Temperature: 60 C
Layer thickness: 0.175 mm
Filament diameter: 1.75 mm
Build Time: 6 hours for mask, 1.5 hours for filter cage
Please give credit to Erica Martelly (firstname.lastname@example.org) and Kenji Shimada (email@example.com).
*This model sourced with permission from the NIH 3D Print Exchange*
|General Instructions||COVID19_MoldableMask_IFU_v2_3.docx||1.90 MB|
|General Instructions||application/pdf||images.pdf||1.41 MB|
|Native CAD||filter_2.SLDPRT||145.01 KB|
|Native CAD||mask_final_large.SLDPRT||990.82 KB|
|Native CAD||mask_final_medium_1.SLDPRT||980.42 KB|
|STL File||Moldable_Mask_Med_Std_2.STL||5.05 MB|
|STL File||Moldable_Mask_Med_Wide_2.STL||5.17 MB|
|STL File||Moldable_Mask_Small_Wide_3.STL||4.67 MB|
|STL File||Moldable_Mask_Small_Std_2.STL||4.18 MB|
|STL File||Moldable_Mask_Large_Wide_2.STL||774.30 KB|
|STL File||Moldable_Mask_Large_Std_2.STL||762.78 KB|
|STL File||Moldable_Mask_filter_2.STL||281.04 KB|
Model downloaded: 0 Time(s)
Additional Owner's Names
General Build Material