Prusa Protective Face Shield RC3 US version

*This model sourced with permission from the NIH 3D print Exchange*Model ID 3DPX-013409Category Labware & DevicesDevice Use Safety and Personal Protective EquipmentKeyword(s) face shieldThe following refers to: 3DPX-013409The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff." This face shield has undergone review in a clinical setting and is recommended when fabricated as instructed. A prototype face shield that Prusa Research developed. This is a version for the US based on the community feedback, the design was adjusted to fit:• American size sheet (11x8,5 inches)• American triple hole punch (distance 4 1/4", hole radius 1/4")Also included is an optional elastic cover designed to close the gap in the headband, while keeping the entire headband flexible. The purpose of the cover is to further protect your face against the aerosol (e.g. cough) falling from the top.PETG Recommended for all.Model Origin https://www.prusaprinters.org/prints/27950-prusa-protective-face-shield-rc3-us-versionExternal Derivative Source Prusa Protective Face Shield RC3 US versionPrusa Protective Face Shield Cover - RC1 (WIP)Printer Technology/Material Material ExtrusionPrint Units mmPre- and Postprocessing Instructions Assembly Manual here: https://manual.prusa3d.com/Guide/How+to+assemble+the+Prusa+Face+Shield+-+RC1-RC2-RC3/1527#_ga=2.131274255.1251442335.1585668708-563513828.1578853173Attribution Instructions https://www.prusaprinters.org/prints/27950-prusa-protective-face-shield-rc3-us-versionhttps://www.prusaprinters.org/prints/27318-prusa-protective-face-shield-cover-rc1-wipReviewer Notes The following refers to: 3DPX-013409The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff." This face shield has undergone review in a clinical setting and is recommended when fabricated as instructed.